Estimated reading time: 4 min
Introduction= This document helps you with adding a new trunk on Tegsoft.
Attention: This document for only technical stuff who has skills on Tegsoft and issue resolving.
You can add a Trunk on Tegsoft easily with few steps.
There is two type trunk you can add on Tegsoft.
Basic type trunk which has only IP Address and Definitions and other one is username and password which called our (Registered Type)
Login on to your Tegsoft server.
Open the System Management menu on the left pane and select the trunks menu.
Hit the + Sign on the left menu also you can list the whole trunk of your system.
You will see the blank page on your right side of the screen which screen has some fields must be filled.
Let the Explain of these fields.
Fill these fields like this scheme
Name = Please type of your Trunk Name. In this tutorial, we will be called a Test Trunk
IP = Please type of your Trunk IP address. In this tutorial, we will type a dummy IP address. Please make sure you’re Ip is correct.
Login on to your Tegsoft server.
Open the System Management menu on the left pane and select the trunks menu.
Hit the + Sign on the left menu also you can list the whole trunk of your system.
You will see the blank page on your right side of the screen which screen has some fields must be filled.
Let the Explain of these fields.
PS: This document contains sensitive data like username and password and we’ve blurred some fields but you can find in the blank version of these screens below.
Please gather your username and password of your line provider.
For now, if you type correctly you can see in the main screen of your Trunk easily, and also you can show the status of your trunk in the terminal with these commands.
System Status
Log in your Tegsoft with terminal
Asterisk -rvvvv
Sip show peers
Now you will see of your Trunks details and status
Was this article helpful?
Views: 425
